Your cart
There are no more items in your cartJDC Electronics Sky Watch Xplorer 3 Anemometer
Anemometer with the following indications:
- Wind speed
- Maximum wind speed
- Ambient temperature
- Temperature felt
- Compass in degrees
This device is equipped with a backlight
Free choice of units (km/h, m/s, knots)
Wind measurement (Models 1, 2, 3, 4)
Units of measurement | km/h, mph, m/s, fps, knots et bft |
Resolution | to the tenth decimal place up to 99.9, then to the unit |
Precision | ± 3% FS |
Range of measurement | from 3 to 150 km/h |
Mesure de la température (Modèles 2, 3, 4)
Units of measurement | °C and °F |
Resolution | to one-tenth of a degree |
Measurement cycle | one measurement every 0.5 seconds |
Precision | ± 0.3 °C at 20 °C / ± 0.5 °C de -20 at +50 °C |
Range of measurement | from -30°C to +60°C |
Compass (Models 3, 4)
Units of measurement | degree |
Resolution | 1 degree |
Precision | ± 4 degrees |
Measurement | in vertical position |
Altitude (Model 4)
Units of measurement | m and ft |
Resolution | 1 m / 3 ft |
Precision | ± 10 m |
Range of measurement | -700 m to +9’000 m |
Absolute and relative pressure (Model 4)
Units of measurement | hPa and inHg |
Precision | ± 1 hPa |
- Dimensions : 41 x 93 x 17 mm
- Weight: 50 g
- Backlight
- Water-tight when immersed
- Replaceable CR2032 lithium battery (battery life: several years of regular use)
- Automatically switches off after 1 minute or possibility of being constantly on
- 2-years warranty
- Recording modes: View in different forms, one out of 48 pressure measurements stored every hour
1 Item
No reviews